Also called ‘Pipe Taps’, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or Jams pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an in./ft. All Pipe Taps furnished with a 2-1/2 in. to 3-1/2 in. thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Appropriate for threading a wide variety of materials both ferrous and non-ferrous
- nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap
- Thread tapers 3/4 of an in./ft.
- Right hand cut tools have a cutting action that engages when they are run in a clockwise direction
Specifications
- Measurement Standard: USS
- Number of Pieces: 1
- Tools Product Type: Hand Tool
- Thread spacing: 8
- Hand Tool Type: Taps
- Individual/Set: Individual
- Product Height (in.): 2
- Product Depth (in.): 6
- Product Width (in.): 2
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov