You can’t beat a Drum Sander for removing planer knife marks and glue lines after panel glue ups while maintaining a consistent board thickness. These 24 in. Drum Sanders are the ideal size for finishing up after most planers and the dual drums allow a coarse and fine sanding in 1 pass, if desired. The G1066Z features a variable-speed feed rate and built-in amp meter to gauge workload. Every shop needs 1 of these.
- 5 HP, 220-Volt drum motor dri-voltes 2 aluminum sanding drums
- Handles stock up to 23-1/2 in. and 4-1/4 in. T
- Variable speed conveyor: 0 FPM to 20 FPM
- Surface speed of drum: 2300 FPM
- Hook and loop sandpaper 3 in. W
- Industrial rubber conveyor belt (similar to wide belt sander belts)
- Control panel with amp load meter
Specifications
- Maximum Speed (rpm): 3450
- Dust collection type: Port
- Tools Product Type: Power Tool
- Maximum feed rate (ft./min.): 20
- Amperage (amps): 25 A
- Variable Speed: Yes
- Color Family: Green
- Condition: New
- Power Tool Features: Variable Speed
- Bench & Stationary Tool Type: Drum Sander
- Portability: Stationary
- Cord Length (ft.): 8
- Voltage (volts): 220
- Product Weight (lb.): 389
- Reconditioned: No
- Table Length (in.): 0
- Belt length (in.): 176
- Belt width (in.): 3
- Product Height (in.): 44.5 in
- Product Depth (in.): 37 in
- Minimum feed height (in.): 0.125
- Table Width (in.): 0
- Maximum feed height (in.): 4.25
- Product Width (in.): 24 in
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
